easy board Werkzeuge u. Verbrauchsmaterialien

Arten von Werkzeugen u. Verbrauchsmaterialien
Kategorieansicht ändern
Ergebnisse: 13
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
SparkFun SparkFun Zubehör This right-angle tactile switch has a great 'click' to it. Also because it's a through-hole design it's very sturdy. Mount it on the edge of your board for easy access. These are rated for 12VDC at 50mA. 57Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör This is a simple and easy to use battery box for powering a micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST connector. This version also features an on/off switch making it easy to turn the micro:bit on and o 22Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards. Since the Thing Plus and Feather footprints are interchangable you can use this shield w
Datenblatt
16Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is
Datenblatt
55Auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör SparkFun Qwiic Shield for Arduino 8Auf Lager
Weitere Infos Verfügbar
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör The RedBoard Artemis takes the incredibly powerful Artemis module and wraps it into the familiar easy-to-use Uno footprint. Think of it as just another Arduino but one that features BLE 5.0 runs at 48MHz (with a 96MHz turbo mode) and boasts 1MB 5Auf Lager
11Auf Bestellung
Min.: 1
Mult.: 1
Nein
SparkFun SparkFun Zubehör Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
Datenblatt
17Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to our Qwiic Connect System. The Twist takes care of all the various interrupts switches PWM'ing of LEDs and presents all those features over an easy-to 15Auf Lager
Min.: 1
Mult.: 1
Nein
SparkFun SparkFun Zubehör The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
Datenblatt
14Auf Lager
Min.: 1
Mult.: 1
SparkFun Lernkits This is a very basic beginner's kit for 8 pin PICAXE microcontrollers. Includes a handful of easy-to-solder through-hole components. Be sure to purchase the 8-pin PICAXE below. A battery snap is provided in this kit but the board must only be drive 7Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör This simple breakout board makes it easy to use our LED tactile switches in a breadboard or your next project.Note: Populate the board according to the polarity of the LED on the switch. The markings for the switch are irrelevant and can be reversed
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 2 Wochen
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector. Nicht auf Lager
Min.: 1
Mult.: 1
SparkFun DEV-17119
SparkFun SparkFun Zubehör The SparkFun Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized to work with the footprint of Teensy 4.0 Teensy 3.2 and Teensy LC. This shield connec
Datenblatt
Nicht auf Lager
Min.: 1
Mult.: 1